Troubleshooting; Cleaning And Maintenance; Warranty And Limitation Of Liability - 3M PELTOR WS ALERT MRX21AWS6 Series Manual

Xpi headset
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

TROUBLESHOOTING

I have problem with the FM radio reception
Check that the batteries are new or fully charged.
Radio reception depends on topography and the environment
you are in. If the reception is poor, try to change area.
I have Bluetooth
connection problem
®
1. Check that the batteries are new or fully charged.
2. Remove all Bluetooth
devices that are synchronized to
®
your phone.
3. Reboot the phone (power on/off your phone).
4. Do a factory reset on the headset.
5. Pair your headset to your phone.
6. If the problem remains, try to pair another phone to see if it
helps.
I hear crackling noises during streaming/phone call.
Bluetooth
is a radio technology which means it is sensitive to
®
objects between the headset and the device it is connected
to. You should be able to have up to 10 meters (33 feet) of
distance between the headset and the connected device if
line of sight (i.e. no walls etc). Even the location of the phone
on the body may be of significance.

CLEANING AND MAINTENANCE

Use a cloth wetted with soap and warm water to clean the
outer shells, headband and ear cushions.
NOTE: Do NOT immerse the hearing protector in water.
If the hearing protector gets wet from rain or sweat, turn the
earmuffs outwards, remove the ear cushions and foam liners
and allow to dry 24h before reassembly. The ear cushions
and foam liners may deteriorate with use and should be
examined at regular intervals for cracking or other damage.
When used regularly, 3M recommends replacing the foam
liners and ear cushions at least twice a year to maintain
consistent attenuation, hygiene and comfort. If an ear cushion
is damaged, it should be replaced. See Spare Parts Section
below.
REMOVING AND REPLACING THE EAR CUSHIONS
F:1 To remove the ear cushion, slide your fingers under the
inside edge of the ear cushion and firmly pull straight out.
F:2 Remove existing liner(s) and insert new foam liner(s).
F:3 Fit one side of the ear cushion into the groove of the
earcup and then press on the opposite side until ear cushion
snaps in place.
Use and storage conditions
• Remove the batteries before storing the product.
• Do not store the hearing protector at temperatures above
+55°C or 131°F (for example on a dashboard, parcel shelf
or window sill) or at temperatures below –20°C or –4°F.
• Do not use the hearing protector at temperatures above
+55°C or 131°F, or below –20°C or –4°F.
SPARE PARTS AND ACCESSORIES
3M™ PELTOR™ HY82 Hygiene Kit
Replaceable hygiene kit. Replace at least twice a year to ensure
constant attenuation, hygiene and comfort.
3M™ PELTOR™ HY100A Single-use protectors
Single-use protector that is easy to fit to the ear cushions.
3M™ PELTOR™ HYM1000, Microphone protection
3M™ PELTOR™ M995/2, Wind shield for speech
microphone
3M™ PELTOR™ FR08 Power supply with USB connector
NOTE! Only use battery charger FR09.
3M™ PELTOR™ FR09 EU Battery charger with USB
connector
3M™ PELTOR™ LR6NM Rechargeable AA batteries

WARRANTY AND LIMITATION OF LIABILITY

WARRANTY: In the event any 3M Personal Safety Division
product is found to be defective in material, workmanship or
not in conformity with any express warranty for a specific
purpose, 3M's only obligation and your exclusive remedy shall
be at 3M's option, to repair, replace or refund the purchase
price of such parts or products upon timely notification of the
issue by you and substantiation that the product has been
stored, maintained and used in accordance with 3M's written
instructions. EXCEPT WHERE PROHIBITED BY LAW, THIS
WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY
EXPRESS OR IMPLIED WARRANTY OF MERCHANTABIL-
ITY, FITNESS FOR A PARTICULAR PURPOSE OR OTHER
WARRANTY OF QUALITY OR THOSE ARISING FROM A
COURSE OF DEALING, CUSTOM OR USAGE OF TRADE,
EXCEPT OF TITLE AND AGAINST PATENT
INFRINGEMENT: 3M has no obligation under this warranty
with respect to any product that has failed due to inadequate
or improper storage, handling or maintenance; failure to
follow product instructions or alteration or damage to the
product caused by accident, neglect or misuse.
LIMITATION OF LIABILITY: EXCEPT WHERE PROHIBITED
BY LAW, IN NO EVENT SHALL 3M BE LIABLE FOR ANY
DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR
CONSEQUENTIAL LOSS OR DAMAGES (INCLUDING
LOST PROFITS) ARISING FROM THIS PRODUCT,
REGARDLESS OF THE LEGAL THEORY ASSERTED.
THE REMEDIES SET FORTH HEREIN ARE EXCLUSIVE.
NO MODIFICATION Modifications to this device shall not be
made without the written consent of 3M Company.
Unauthorized modifications may void the warranty and the
user's authority to operate the device.
GB
6

Advertisement

Table of Contents
loading

Table of Contents