3M PELTOR WS ALERT MRX21AWS6 Series Manual page 11

Multipoint Bluetooth
®
This headset supports Bluetooth
Multipoint technology to connect your headset to two
Bluetooth devices at the same time. Depending on the type
®
of Bluetooth devices connected and their current activities,
®
the headset controls the Bluetooth
The headset prioritizes and coordinates activities from the
connected Bluetooth devices.
®
Pairing a Bluetooth device (fig. 2, fig. 5)
®
The first time the headset is powered on, it automatically
enters pairing mode. A voice message confirms, "Bluetooth
pairing on". Pairing mode can also be entered from the menu.
This is necessary for pairing a second device (fig. 6).
See Configuring your headset.
Make sure that Bluetooth is activated on your Bluetooth
®
device. Search and select "WS Alert XPI" on your Bluetooth
device. A voice message confirms when the pairing is
complete, "Pairing complete" and "Connected".
NOTE: You can always stop the pairing process by long press
(2 s) the Bluetooth button [
®
NOTE: Only one of the two paired devices can be a two-way
radio, the headset only supports two-way radio with 3M™
PELTOR™ Push-to-talk protocol. Any questions, please
contact your local distributor.
NOTE: When a 3rd Bluetooth
one of the previous paired devices is removed from the
headset. If one of the devices is connected, the unconnected
device is removed. Otherwise, the 1st paired device is
removed.
Reconnecting Bluetooth devices.
®
When the headset is powered on, it tries to reconnect to all
paired devices during 5 minutes. A voice message will confirm
the connection "Connected".
NOTE: If the link is lost, the headset will try to reconnect
during 30 seconds. A voice message will inform you if you get
link loss,
"Disconnect".
and multipoint. Use
®
devices in different ways.
®
®
] (fig. 7)
device is successfully paired,
®
Connected and operating one or two phones (see fig. 7).
Bluetooth
®
button
No activity
Streaming
Incoming call
Outgoing call /
Call in progress
Short press
Call in progress
®
on one phone,
incoming call on
second phone
No activity /
®
Streaming
Incoming call
Call in progress
Long press
Call in progress
on one phone,
incoming call on
second phone
Connected to two-way radio and/or phone.
Operating two-way radio (see fig. 7).
Bluetooth
®
button
No activity/
Press
Streaming
Transmitting on
Release
Two-way radio
State Action
Play
Pause
Answer
End call
End ongoing call,
answer incoming call
Voice control on the
last paired device
Reject
Toggle call between
phone/headset
Reject incoming call.
State Action
Start transmitting on
two-way radio
Stop transmitting on
two-way radio
GB
4