Sony XVS-G1 User Manual page 34

Channel selection buttons
Function Button
name name
Channel 1 to CH1 to
Channel 12 CH12
K1 Resizer to K1RSZ to
K8 Resizer K8RSZ
FM 1 Clip to FM1 CLIP
FM 16 Clip to FM16
CLIP
Clip Player 1 CLIP1 to
to Clip Player CLIP4
4
Notes
• When multiple channels are selected, the first selected
button becomes the reference, and is lit green.
Subsequent selected buttons are lit amber.
• [CH1] to [CH8] and [K1RSZ] to [K8RSZ] share the
same buttons.
b Operation buttons (assignable buttons)
You can assign buttons for use in each operation mode in
the Home > Setup > Panel > Module > Button Assign
menu (19104.21).
For details about assigning buttons, see "Assigning
Control Panel Buttons" (page 397).
Resizer operation mode
This mode is used for two-dimensional transform
operations on images using a resizer.
For details about resizer operations, see "Resizer"
(page 137).
Function Button Description
name name
Aspect/ ASP PERS Adjusts the aspect ratio of a key
Perspective using the trackball or Z-ring.
Location LOC SIZE • Moves a key using the
Size
• Scales a key (shrink/magnify)
Rotation ROT • Rotates a key using the
• Adjusts the perspective of a
Description
CH1 to CH4:
Selects the target DME
channel in three-dimensional
transform operation mode.
CH1 to CH12:
Selects the target device in
device/frame memory/clip
player operation mode.
Selects the target resizer in
resizer operation mode.
Selects the target frame
memory output channel in
device/frame memory/clip
player operation mode.
Selects the target clip player
output channel in device/
frame memory/clip player
operation mode.
trackball.
using the Z-ring.
trackball.
key using the Z-ring.
Function Button
name name
Shift SHIFT
Clear Work CLR
Buffer WORK
BUFR
Resizer On RSZR ON
X X
Y Y
Z Z
Fine FINE
M/E M/E DEF
Default RCALL
Recall
34
Description
Used in combination with the
[CTR], [CLR WORK BUFR], and
[BDR/CROP] buttons.
• When the [CLR WORK BUFR]
button is pressed once:
Returns the two-dimensional
transform parameters to the
initial settings.
• When the [CLR WORK BUFR]
button is pressed twice, or the
[CLR WORK BUFR] button is
pressed once while pressing
the [SHIFT] button:
Returns all resizer parameters
to the initial settings.
Enables/disables the selected
resizer.
• Restricts the parameters
targeted by the operation.
When the [X] button is lit:
Operations on parameters on
the X-axis using the trackball
are enabled.
When the [Y] button is lit:
Operations on parameters on
the Y-axis using the trackball
are enabled.
When the [Z] button is lit:
Operations on parameters on
the Z-axis (Z-ring adjustment
items) using the Z-ring are
enabled.
• When the [ROT] button is lit,
the [X] button and [Y] button
select the direction of rotation.
• When the [BDR/CROP] button
is lit green, the [X] button, [Y]
button, and [Z] button select
the edge (top edge, left edge,
right edge) to crop.
• When the [X] button, [Y]
button, and [Z] button are lit
green, you can enter
parameter settings using the
numeric keypad control block.
Switches to fine mode, enabling
fine adjustment control of setting
values using the trackball and Z-
ring.
When the [M/E DEF RCALL]
button is pressed twice:
Returns the switcher bank to the
initial settings.