Advertisement
2
In the [Ref Output Format] group, select a reference
signal.
Tri Sync: HD tri-level sync
BB: Black burst or sync
Note
When the system signal format is 720P and the input
reference signal is set to [Tri Sync], the black burst
field information generated by the switcher is used
when the output reference signal is set to [BB].
3
Press the [Apply] button in the [Signal Format/
Frequency/Ref] group.
To return to the previous setting
Press the [Clear] button in the [Signal Format/
Frequency/Ref] group.
4
Check the message, then press [OK].
The switcher system reboots.
Setting the Image Switch Timing
1
Open the Home > Setup > System > Format/Config >
Format menu (19101.22).
2
In the [Switch Timing] group, select the switch
timing.
Any: Not specified
Field1: Field 1
Field2: Field 2
Note
When the system signal format is 720P and the
frequency is 50, set to [Any] (fixed).
Setting the Reference Phase
1
Open the Home > Setup > System > Format/Config >
Format menu (19101.22).
2
Press the [System Phase] button and enter a reference
phase (microseconds) in the numeric keypad
window.
Setting the Dynamic Range
Setting the OETF and color space
You can select the OETF (Opto-Electronic Transfer
Function) and color space.
The combinations of signal formats and OETF/color
space that can be selected are as follows.
Signal format
OETF
2160P
SDR
HLG, PQ, S-Log3
(HDR), S-Log3 (Live
HDR)
1080P
SDR
HLG, PQ, S-Log3
(HDR), S-Log3 (Live
HDR)
1080i
SDR
720P
SDR
Notes
• Correct operation may not occur for settings other than
the combinations above.
• Changing the OETF/color space settings may
momentarily distort the image.
• When TIFF file/BMP file/TARGA file/PNG file
content is loaded into frame memory or an SL key, any
changes to the color space are not applied to the images.
To reflect the change in color space, unload and then
reload the content.
1
Open the Home > Setup > System > Format/Config >
HDR/SDR Format menu (19101.23).
2
In the [OETF] group, select an OETF.
SDR: SDR (Standard Dynamic Range)
HLG: HLG (Hybrid Log Gamma)
PQ: PQ (Perceptual Quantization)
S-Log3 (HDR): S-Log3
S-Log3 (Live HDR): Display with system gamma
added to S-Log3
3
In the [Color] group, select a color space.
BT.709: BT.709 color space
BT.2020: BT.2020 color space
Setting the input signal conversion mode
1
Open the Home > Setup > System > Format/Config >
HDR/SDR Format menu (19101.23).
366
Color space
BT.709,
BT.2020
BT.2020
BT.709
BT.2020
BT.709
BT.709
Advertisement
Chapters
