Advertisement
Number of Switcher
Resources
The number of resources that can be used will vary
depending on the system signal format.
The maximum number of resources for 4K format
(2160P) and HD format (1080P, 1080i, 720P) are shown
below.
Note
To use 4K formats, the XZS-G1500 4K Upgrade License
is required.
Resource
a)
Switcher banks
When M/E split is enabled
b)
Keys
Keys per switcher bank
Inputs
Inputs configurable with a format
c)
converter
Inputs configurable with a color corrector/
d)
HDR converter
Outputs
Outputs configurable with a format
c)
converter
Outputs configurable with a color
corrector/HDR converter
e)
DME channels
DME channel 1 when enhanced function
mode is enabled
DME channels 1 and 2 when enhanced
function mode is enabled
Frame memory output channels
Clip player output channels
Multi viewers
Color backgrounds
a) You can change the switcher bank (M/E-1 to M/E-5, P/P) assignment in
the Home > Setup > Switcher > Config > M/E Assign menu (19103.11).
b) If the number of keys on a single switcher bank is four or lower, SL keys
can be used.
c) When the system signal format is 720P, a format converter cannot be
used.
d) To use the HDR converter function, the XZS-G1750 HDR Converter
License is required.
e) To use the DME function, the XKS-G1600 GPU Pack and XZS-G1610
3D DME License are required.
For 4K formats, either DMEs or SL keys can be enabled.
f) To use the clip player function, the XKS-G1600 GPU Pack and
XZS-G1800 Clip Player License are required.
4K
HD
1
2
2
4
4
16
4
8
24
44
12
24
6
–
12
24
6
12
3
–
d)
2
4
1
3
–
2
6
16
f)
2
4
1
2
1
2
SL Key Restrictions
If the number of keys on a single switcher bank is four or
lower, SL keys are set as key 5 to key 8.
Only one switcher bank can use an SL key.
To use the SL key function, the following options are
required.
• XKS-G1600 GPU Pack
• XZS-G1620 SL Key License
When the system signal format is 2160P, the SL key
function must be enabled for use.
For details about setting GPU functions, see "Setting a
GPU" (page 364).
Restrictions
Setting keys
• Only Linear key type supported
However, the following settings are not supported.
– [Filter] parameter
– Clean mode
– Key invert
– Key position
• Key edge not supported
• Mask not supported
• Blink not supported
• Processed Key not supported
• Video Process supported
However, the following settings are not supported.
– [Hue Delay] parameter
– [Black Level] parameter
• For resizer, only two-dimensional transform movement
([Location X] parameter, [Location Y] parameter)
supported
• Use of still image combined content for key fill/key
source
– Selecting a signal using cross-point buttons not
supported
– Color matte setting for key fill not supported
– Selecting self mode/auto select mode/split mode for
key source not supported
• Key Priority supported
However, the following restrictions apply.
– SL keys (key 5 to key 8) assigned the priority of four
keys as a single group
– Within SL keys (key 5 to key 8), arbitrary priority
supported
Transitions
• Configurable for mix and cut transition types only
• Transition preview not supported
• Key priority change not supported, depending on the
transition
466
Advertisement
Chapters
