Advertisement
Name
Description
4th row
• Selects the background B bus signal when
in key/AUX bus delegation mode or key bus
mode.
• Selects the bus signal assigned by the
delegation buttons in the cross-point pad
when in free assign mode.
Selects the utility function when a utility/
shotbox bank is assigned using the
delegation buttons in the cross-point pad.
• Selects the utility 2 bus signal when in utility
bus mode.
b Display
The display shows the following information.
• Settings of buttons on the 1st row to 4th row (signal
name, bus name, register name, or function name
assigned to the button)
• Macro register name of macro attachment assigned to
the 1st row to 4th row buttons
When the [SHIFT] button function is set, "SHFT"
appears on the display. When the shifted state is selected,
"SHFT" is displayed highlighted, and the button
information also toggles to show the shifted state display.
Display mode
Six types of display mode can be set according to the
information to display. You can switch the mode using
the display mode button assigned to the cross-point pad.
The display can also be subdivided (top and bottom) to
display two pieces of information.
For details, see "Setting the Display" (page 404).
c Cross-point indicators
When lit, these indicate the source color of the video
signal assigned to buttons on the 3rd row.
If a signal cannot be selected, because a signal is not
assigned or the inhibit setting is set, the indicator is not lit.
You can disable the cross-point indicators so that they do
not turn on.
For details, see "Setting the on/off state of cross-point
indicators" (page 404).
d Cross-point pad (assignable buttons)
You can assign functions, such as settings and operations,
of the cross-point button rows in the Home > Setup >
Panel > Xpt Module > Xpt Pad Button Assign menu
(19104.36).
You can configure up to 14 pages (page 1 to page 14) of
settings, where each page contains functions assigned to
the 15 cross-point pad buttons as a group.
For details about assigning buttons, see "Setting a Cross-
Point Pad" (page 405).
Cross-point pad operation
HOME button
Select a cross-point pad page (page 1 to page 14) to
switch the functions assigned to the buttons.
Page selection is done using the following buttons.
• [HOME] button: Display the home page.
• [<<] button: Move to the previous page.
• [>>] button: Move to the next page.
• Button assigned with page recall function: Display the
specified page.
You can also press the current page name display button
or simultaneously press the [<<] button and [>>] button to
switch from the cross-point pad to the select page display
and then press a button to select a page to display. To exit
the select page display, press the [EXIT] button.
Note
The button assigned with the page recall function has a
white frame added to the button name display.
Assignable functions
Function name
Others:
Home
Others:
Prev
Others:
Next
Others:
Current Page
Status
19
Current page
name display
button
Button
Description
name
HOME
Displays the home page
of the cross-point pad.
<< XXX
Displays the previous
page of the cross-point
pad.
XXX = Page name (up
to 12 characters)
>> XXX
Displays the next page
of the cross-point pad.
XXX = Page name (up
to 12 characters)
PAGE1
Displays the number
XXX to
and name of the
PAGE14
currently displayed
XXX
page.
XXX = Page name (up
to 12 characters)
Advertisement
Chapters
