Advertisement
Copying Files
You can copy files in each category between packages.
Note
Files cannot be copied to a locked package.
1
Open the Home > File > All > Copy > Copy menu
(10102.21).
2
Press the [Select] button in the [Source Package]
group.
The [Select Package] window appears.
3
Select a copy source package and press [OK].
To select the default package
Press the [Default Package] button.
If there is no default package, a new default package
is created.
4
Press the [Select] button in the [Target Package]
group.
The [Select Package] window appears.
5
Select a copy destination package and press [OK].
To create a new package
Press the [New Package] button to display the [New
Package] window.
Specify a package name, tags, and memo in the same
way as in [Edit Properties] window.
For details, see "Editing Package Properties"
(page 334).
To select the default package
Press the [Default Package] button.
If there is no default package, a new default package
is created.
6
Select the target category to copy.
To select a setup data category, select a button in the
[Setup] group.
To select a register data category, select a button in
the [Register] group.
To select all categories, set the [All Categories]
button to the on state.
Note
The categories saved in the selected copy source and
copy destination packages are displayed in white
characters in the [Source Package] group/[Target
Package] group category display area.
The files in the categories included in the copy source
package become the target for copying.
If the copy destination package already contains the
same categories, the files will be overwritten.
7
Press the [Copy] button.
8
Check the message, then press [OK].
The files in the selected categories are copied.
337
Advertisement
Chapters
