Selecting A Bus (Aux Bus Control Block); Operation Mode Of A Button Row; Bus Types And Assignments - Sony XVS-G1 User Manual

Selecting a Bus (AUX
Bus Control Block)
The cross-point button rows in an AUX bus control block
(AUX bus operation mode) are shared by multiple buses.
Buses are assigned to the cross-point button rows for use.

Operation Mode of a Button Row

The button rows in an AUX bus control block may have
different operation modes depending on whether second
delegation mode is enabled/disabled.
Second delegation mode is disabled by default. To
enable, press the [2ND DELG] button, turning it on, in the
cross-point pad.
When second delegation mode is enabled
The 1st row and 2nd row are used as delegation button
rows. The bus to assign to the 3rd row is selected in the
1st row, and the bus to assign to the 4th row is selected in
the 2nd row.
The 3rd row is used as a cross-point button row for the bus
selected in the 1st row. The 4th row is used as a cross-
point button row for the bus selected in the 2nd row.
When second delegation mode is disabled
The 1st row and 2nd row are used as delegation button
rows. The bus in the unshifted state is selected in the 1st
row, and the bus in the shifted state is selected in the 2nd
row.
The 3rd row and 4th row are used as cross-point button
rows for the bus selected in the 1st row/2nd row. The
signal in the unshifted state is selected in the 3rd row, and
the signal in the shifted state is selected in the 4th row.
Note
When second delegation is disabled, the 1st row and 3rd
row shift buttons are set to hold mode (fixed). You can
select the button number in the shifted state while
pressing the shift button.
The 2nd row and 4th row are always in the shifted state,
hence the shift buttons cannot be operated.

Bus Types and Assignments

You can select buses using the delegation buttons for
assignment to the 3rd row/4th row cross-point button
rows.
The assignable buses and assignment operation are as
follows.
Notes
• You can assign delegation buttons to the 1st row/2nd
row.
For details about assigning buttons, see "Setting a
delegation button row" (page 404).
• When using an SL key, key bus operation is disabled.
For details about SL keys, see "SL Key" (page 116).
Bus
Key 1 fill bus to key
8 fill bus
Key 1 source bus to
key 8 source bus
Utility 1 bus
Utility 2 bus
a)
Utility 2 bus (sub)
DME external video
bus
DME utility 1 bus
DME utility 2 bus
Edit preview bus
AUX1 bus to
AUX48 bus
Frame memory
source 1 bus
Frame memory
source 2 bus
DME1 video bus to
DME4 video bus
86
Assignment operation
Press the following buttons in the 1st
row/2nd row, turning them on.
• [M/Ex KEY1 V] to [M/Ex KEY8 V]
buttons (x = 1 to 5)
• [P/P KEY1 V] to [P/P KEY8 V]
buttons
Press the following buttons in the 1st
row/2nd row, turning them on.
• [M/Ex KEY1 K] to [M/Ex KEY8 K]
buttons (x = 1 to 5)
• [P/P KEY1 K] to [P/P KEY8 K]
buttons
Press the following buttons in the 1st
row/2nd row, turning them on.
• [M/Ex UTIL1], [M/Ex UTIL2]
buttons (x = 1 to 5)
• [P/P UTIL1], [P/P UTIL2] buttons
Press the following buttons in the 1st
row/2nd row, turning them on.
• [M/Ex SUB UTIL2] button (x = 1 to
5)
• [P/P SUB UTIL2] button
Press the following buttons in the 1st
row/2nd row, turning them on.
• [M/Ex DME EXT] button (x = 1 to 5)
• [P/P DME EXT] button
Press the [DME UTIL1] and [DME
UTIL2] buttons in the 1st row/2nd
row, turning them on.
Press the [EDIT PVW] button in the
1st row/2nd row, turning it on.
Press the [AUX1] to [AUX48] buttons
in the 1st row/2nd row, turning them
on.
Press the [FMS1] and [FMS2] buttons
in the 1st row/2nd row, turning them
on.
Press the [DME1V] to [DME4V]
buttons in the 1st row/2nd row,
turning them on.