Troubleshooting Your HP Visualize Linux Workstation
If Your Workstation Has a Hardware Problem
If an Accessory Board Does not Work
Carry out the following checks:
• Check that the accessory board has been firmly installed in the slot.
• Check that the accessory board has been correctly configured.
• Check that the accessory board is not using memory, I/O addresses,
an IRQ, or DMA also used by the Workstation. Refer to the section
"IRQs, DMAs, and I/O Addresses Used by Your Workstation" in the
chapter "Technical Information" for more information.
70
Chapter 3