HP PL Class 450/500/550/600/650/700/750 User Manual page 89

System Info.
Boot Steps
Diags
System information is displayed on the LCD one screen at a time and
should detail the following:
• Bios version
• Number & speed of processors
• Number and capacity of memory modules installed
• Serial Number
To view these details, use the
information screens.
Where available, the Boot steps option will display all POST steps the
next time your Workstation is powered on. For support purposes, POST
steps are shown as POST codes and displayed on the LCD as follows:
If your Workstation is powered off when Diags is selected, the LCD
displays a second menu. To perform the diagnostics tests, select Power on
from this menu to enable the hardware management chip to assess the
status of your system's components.
If your Workstation is already powered on, the diagnostic tests will be
performed as soon as you select Diags from the LCD's main menu.
To view the test results for each system component, press the
control button.
If no component errors are detected, the following screen will appear.
COMPONENT
Next
If an error is detected, an error screen appears indicating the problem.
Chapter 3
Troubleshooting Your HP Visualize Linux Workstation
Using HP MaxiLife to Diagnose Problems
button to scroll through the
HP KAYAK XA-s
POST Code 24
No errors were detected.
Post steps will be displayed on
the LCD the next time your
Workstation is powered on.
73