HP PL Class 450/500/550/600/650/700/750 User Manual page 74

Troubleshooting Your HP Visualize Linux Workstation
If Your Workstation Does Not Start Properly
the Workstation from any telecommunications network.
3. Remove the cover.
4. Check the following items:
LCD Error
Messages
Check all internal cables.
Power CPU 1 Check that the processor and
Power CPU 2 VRM are correctly installed.
CPU Freq Check that the processor
speed switches have been set
correctly.
CPU error Reset the Workstation or
power-off the LAN.
Check that the memory
modules are correctly
installed.
Check that accessory boards
are firmly seated in their
slots.
Verify that any switches and
jumpers on the accessory
boards are properly set.
Check that the switches on
the system board are
properly set.
58
Action
Ensure they are correctly attached
and firmly in place.
Refer to the section "Installing a
Processor" in the chapter "How to
Install Accessories Inside Your
HP V
Workstation."
Refer to the section "System
Board Switches" in the chapter
"Technical Information."
Refer to the section "Your
Workstation's Hardware Control
Panel" in the chapter "Setting Up
and Using Your HP V
Linux Workstation."
Refer to the section "Installing
Memory" in the chapter "How to
Install Accessories Inside Your
HP V
Workstation."
Refer to in the section "Installing
Accessory Boards" in the chapter
"How to Install Accessories
Inside Your HP V
Workstation."
Refer to the manuals that came
with each board.
Refer to the section "System
Board Switches" in the chapter
"Technical Information."
Reference
Linux
ISUALIZE
ISUALIZE
Linux
ISUALIZE
Linux
ISUALIZE
Chapter 3