Installing A Hard Disk Drive In A Front-Access Shelf - HP PL Class 450/500/550/600/650/700/750 User Manual

How to Install Accessories In Your HP Visualize Linux Workstation
Installing Mass Storage Devices
9. Connect the power cable and the data cable to the rear of the drive.
(The connectors are shaped to go in one way only.)
Data Cable
10. Install any other accessories before completing the installation.
11. Turn to page 42 to complete the installation.

Installing a Hard Disk Drive in a Front-Access Shelf

1. Disconnect the computer's power cord and any telecommunications
cable.
2. Remove the computer's cover (see page 22).
3. Remove the fan connection to the system board (see the illustration
on page 26).
4. Press the retaining buttons on each side of the HP UltraFlow airflow
guide and lift it out of the Workstation's case.
5. Slide out the power supply to provide better access to the disk drive
cables (see page 26).
38
Power Cable
Chapter 2