Chapter 1 Setting Up And Using Your; Unpacking Your Hp Visualize Linux Workstation - HP PL Class 450/500/550/600/650/700/750 User Manual

WARNING
Installation Tools
Setting Up and Using Your HP Visualize Linux Workstation

Unpacking Your HP Visualize Linux Workstation

Unpacking Your HP V
Workstation
If you are in any doubt that you can lift the Workstation and the
display safely, do not try to move them without help.
1. When you receive your Workstation, unpack all of the components:
˘ Computer and power cords
˘ Display and its video cable
˘ HP keyboard, mouse and headphones
˘ Manuals and CD-ROMs.
2. Place the Workstation on (or under) a sturdy desk with easily
accessible power outlets and enough space for the keyboard, mouse,
and any other accessories.
3. Position the Workstation so that its rear connectors are easily
accessible.
4. Place the display next to the computer.
No tools are required to install your Workstation. However, if you plan to
install a disk drive or an accessory board inside your Workstation, you
will need a flat-blade screwdriver. For more information on installing
accessories, refer to the chapter "How to Install Accessories Inside Your
HP V Linux Workstation."
ISUALIZE
2
Linux
ISUALIZE
Chapter 1