HP PL Class 450/500/550/600/650/700/750 User Manual page 24

NOTE
Setting Up and Using Your HP Visualize Linux Workstation
Connecting an External SCSI Accessory
3. Connect the SCSI accessory to your Workstation's external 16-bit
SCSI connector with a shielded SCSI cable.
4. Refer to the manual provided with the SCSI accessory to learn how to
install any software that may be necessary to use it.
The total length of the external SCSI cables should not exceed 3 meters
(approximately 10 feet).
Contact your dealer to order shielded HP SCSI cables to connect external
SCSI accessories.
See the section "Installing Mass Storage Devices" in the chapter "How to
Install Accessories Inside Your HP V
information on how to connect internal SCSI devices.
8
Linux Workstation" for
ISUALIZE
Chapter 1