NOTE
Technical Information
Using the SCSI Configuration Utility
Starting the SCSI Configuration Utility
You access the SCSI Configuration Utility by pressing
message Press F6 to start Configuration Utility... is displayed during the
Workstation's start-up routine. A further message is then displayed:
Please wait, invoking Configuration Utility... before the Main menu of
the Symbios Logic SCSI Configuration utility appears.
Main Menu
The items shown on your screen may be different from those shown
below.
Symbios Logic SCSI Configuration Utility
MAIN MENU
.SYM53C875
Change Adapter Status.
Adapter Boot Order
Additional Adapter Configuration
Display Mode = Verbose.
Mono/Color.
Language
Help.
Quit.
Use arrow keys to select from menu. Then press ENTER
1. Only used if more than one Symbios card is installed.
2. Not available (English only).
Use the
and
from this menu.
You can only select an adapter if the current status is "On". Changes are
possible only if NVRAM (non-volatile memory on your adapter) is
present.
100
Version 1.07
Port
Irq
------Status------
Num
Level
Current
E800
3
On
1
.
2
.
BIOS Code Segment: C800
keys and the
NvRAM
Next-Boot
Found
On
Yes
1
.
key to make a selection
when the
Chapter 4