HP PL Class 450/500/550/600/650/700/750 User Manual page 41

Intrusion Monitor
How to Install Accessories In Your HP Visualize Linux Workstation
4. Lower the latches on the front sides of the cover.
5. If required, lock the cover using the key provided.
6. Reconnect all the power cables.
Your HP V
ISUALIZE
monitor, which is located on the front of the Workstation, behind the
Hardware Control Panel. It is designed to detect whether your
Workstation has been opened since the last time it was used:
• If your Workstation has been opened, it is assumed that the system
configuration has changed and a full start-up check is carried out.
• If your Workstation has not been opened, it is assumed that the
system configuration has not changed and a reduced start-up check is
carried out.
Chapter 2
Removing and Replacing the Cover
Linux Workstation is equipped with an intrusion
25