Setting Up and Using Your HP Visualize Linux Workstation
Connecting to a Network
Connecting to a Network
Your HP V
ISUALIZE
adapter.
The LAN adapter supports both 10 Mbit/s and 100 Mbit/s operations and
automatically detects which network type is being used.
1. Connect the RJ-45 plug on your network cable to the LAN connector
on the LAN Adapter. Push the plug into the connector until the plug
clicks into place.
2. Attach the other end of the LAN cable to a hub (or into a wall socket
that is connected to a hub).
For further instructions on configuring your network connection, refer to
the section "Configuring Your Network Connection" in the chapter
"Technical Information."
Let your Network Administrator know that you are connecting
your Workstation to the network.
4
Linux Workstation has a 10BT/100TX LAN interface
The board shown here is a
combined SCSI/LAN board.
Chapter 1