Connecting To Your Wireless Network; Enabling And Disabling Wake On Lan (Wol) Function; Managing Apps - HP Chromebox User Manual

Connecting to your wireless network

To connect to a wireless network, follow the steps below.
1. From the Chrome desktop, click the Chrome menu and then select Wireless networks available,
or select the wireless icon
2. Select the wireless network you wish to access and click Connect.
3. Provide passwords and encryption keys as prompted. A network protected with a password and/
or encryption key will be indicated by the secure connection icon
administrator for more information, if needed.

Enabling and disabling Wake on LAN (WOL) function

Wake on LAN (WOL) is a function that allows your device to be turned on by a message sent across
your local area network, or LAN.
NOTE: Wake on LAN only functions when a LAN cable is attached. WOL will be reset to its default
setting (WOL-enabled) after a system reboot.
NOTE: Accessing the WOL function requires initiating a Recovery and entering developer mode.
Please ensure that all of your files are saved to the cloud or to an external drive before proceeding.
The process for enabling and disabling WOL may change as the operating system is updated. For
further information and updates, go to http://www.hp.com/support, and select your country. Select
Drivers & Downloads, and then follow the on-screen instructions to find documentation relevant to
your device. You may also refer to
chrome-os-devices
You may turn this function on and off by following the directions below:
1. Altering WOL settings requires entering development mode. Please refer to
http://www.chromium.org/chromium-os/developer-information-for-chrome-os-devices
directions on accessing developer mode on your device.
2. After initiating developer mode, the system will restart automatically, and you will be prompted to
set up your language and keyboard again, and sign in to your user account.
3. Once you've signed in, you will see the Chrome desktop. From here, press
+ Alt +
4. On the console screen, type root and press Enter.
5. At the next prompt, type ethtool -s eth0 wol d and press
enable WOL function, type ethtool –s eth0 wol g and press Enter.
6. Press
NOTE: Changes to Wake on LAN functions may only be applied when a LAN cable is attached.
WOL will be reset to its default setting (WOL-enabled) after a system reboot.

Managing apps

You can expand the productivity and entertainment capabilities of your Chromebox with free or
purchased apps that can be downloaded directly to your device.
10 Chapter 3 Using your Chromebox
for information about accessing developer mode.
→ to enter console mode.
Ctrl + Alt + F1 or Ctrl +
in the status area at the lower right side of the screen.
http://www.chromium.org/chromium-os/developer-information-for-
Alt + → to return to the Chrome desktop.
. Contact your network
Ctrl
Enter to disable WOL function. To
for
+ Alt + F2 or Ctrl