Machine In The Darkroom, Film Exit In The Daylight, Light Seal At The Dryer With Light Tight Wall; Installation At The Wall Opening With Light Tight Wall - AGFA Classic E.O.S. Installation Planning

Installation Planning
7.2
7.2.1
TYPE 5270/100
Chapter 14 / 14
Machine in the darkroom, film exit in the daylight,
light seal at the dryer with light tight wall

Installation at the wall opening with light tight wall

1 Film feed
2 Wall
3 A 60° chamfer must be
provided on the wall opening.
4 Light tight wall
5 Film output (wire chute)
6 Light seal
(foam rubber – by the meter)
Order no. CM+0000014259
7 Wall base
The lower the height of the wall opening the more difficult will be the access
to the film removal.
Wall opening
1 Wall
2
Overlap wall / light tight
wall at least 50 mm (1.97
inch) on all sides
Wooden board, 20 mm
3 (0.79 inch) with opening
See 7.3, Light tight wall
Classic E.O.S. / Classic E.O.S. CL
(Type 5270 / 100 / 105)
Darkroom
1
Figure 11
Dimensions in mm (inch)
min. 670 (26.4)
max. 680 (26.8)
Figure 12
Dimensions in mm (inch)
DD+DIS303.03E
Daylight
2
3
6
7
527014rm.cdr
3
2
1
1
2
527014lm.cdr
Edition 6, Revision 0