Table of Contents
Advertisement
DD+DIS303.03E
8.2.4
TYPE 5270/100
Edition 6, Revision 0
Installing the disposal hoses
Only use fiber-reinforced PVC hoses Ø 19x4 mm (0.75x0.16 inch) for the
external hose connections (outside the machine)!
Position the hoses without kinks!
A
2
1
3
(A)
Drain direction
(B)
Developer drain / overflow
(C)
Fixer drain / overflow
Pos Designation
1
PVC hose Ø 19x2.5 mm
(0.75x0.10 inch) transparent
2
Hose clamp
3
Hose connection stub
Ø 20 mm (0.79 inch)
4
Threaded bush
5
Hose clamp
6
Rubber elbow
7
Pipe stub
Ø 20 mm (0.79 inch)
8
PVC hose,
Developer (red, fiber-reinforced):
Ø 19x4 mm (0.75x0.16 inch)
Fixer (blue, fiber-reinforced):
Ø 19x4 mm (0.75x0.16 inch)
Water (transparent, fiber-reinforced):
Ø 19x4 mm (0.75x0.16 inch)
• Combine the hoses of the safety overflow (OVERFLOW) and water (WAT)
with a Y piece and connect them with one drain hose, if this is permitted by
the local regulations. Install the drain hose to the floor drain.
Classic E.O.S. / Classic E.O.S. CL
(Type 5270 / 100 / 105)
4
6
5
5
7
5
8
Figure 17
(D)
Water drain / overflow
(E)
Safety overflow, tanks
Configuration
Pre-installed in the machine
Included in the accessory box
Not included in shipment, can
be ordered, CM+9037200400
Not included in shipment, can
be ordered, CM+9889629521
Not included in shipment, can
be ordered, CM+7839185010
Not included in shipment,
can be ordered
CM+0000064133
CM+0000064134
CM+0000007620
Installation Planning
E
D
B
527003QM.CDR
Chapter 14 / 19
Advertisement
Table of Contents
