Installing The Developer / Fixer Supply Hoses - AGFA Classic E.O.S. Installation Planning

Installation Planning
8.2.3
TYPE 5270/100
Chapter 14 / 18

Installing the developer / fixer supply hoses

Only use fiber-reinforced PVC hoses Ø 10x3 mm (0.39x0.12 inch) for the
external hose connections (outside the machine)!
Position the hoses without kinks!
Installing the developer / fixer supply:
2
1
3
4
(F) Developer (DEV)
(G) Fixer (FIX)
POS Designation
1 PVC hose
Ø 9x1.5 mm (0.35x0.06 inch)
2 Hose positioning /
reinforcement bend-protection
3 Hose clamp
4 Hose connection stub
5 Threaded bush
6 Rubber elbow
Ø 10 mm (0.39 inch)
7 Hose clamp
8 Pipe stub
Ø 10x1 mm (0.39x0.04 inch)
9 PVC hose
Ø 10x3 mm (0.39x0.12 inch)
fiber-reinforced
Developer: red
Fixer: blue
10 Hose clamp
Classic E.O.S. / Classic E.O.S. CL
(Type 5270 / 100 / 105)
5
7
6
7
8
10
9
A
Figure 16
(A) Supply direction
DD+DIS303.03E
527003OM.CDR
Configuration
Pre-installed in the machine
Not included in shipment, can be
ordered, CM+7946064580
Pre-installed in the machine
Included in the accessory box
Not included in shipment, can be
ordered, CM+9511017970
Not included in shipment, can be
ordered, CM+7037200210
Not included in shipment, can be
ordered, CM+9511017920
Not included in the shipment, can
be ordered,
CM+0000064082
CM+0000064083
Not included in shipment, can be
ordered, CM+7037200230
Edition 6, Revision 0
G
F