Connection Startup Dialog Box - HP Compaq t1000 Supplementary Manual

Figure 8-2 Connection Startup Dialog Box
To invoke the Connection Startup dialog box:
1. Click on the Configure tab in the T1000 Connection Manager dialog box.
2. Click on the Startup command button on the Configure properties sheet.
The following table describes the functions of this dialog box.
Table 8-2 Connection Startup Dialog Box
Function
Make the Selected Connection Your
Default Connection
Automatically Start the Selected
Connection at Startup
Note
The functions in the Startup Options group box are
mutually exclusive.
Description
Enable this function to use the
connection you selected in the T1000
Connection Manager as the default
connection. The default connection is
the connection that always appears in
the Connection Name list.
When you enable this function, your
terminal will automatically use the
connection you selected in the T1000
Connection Manager.
49