Table 5-1 Network Properties Sheet, Continued
Function
Advanced Network
Note
If you do not know your network's communication
speed or whether the communication link should be
half- or full-duplex, contact your system administrator.
Description
Click on this command button to invoke the Advanced
Network Settings dialog box:
The Advanced Network command button is activated when
Specify an IP Address is selected. By default this command
button is deactivated.
Enable DNS
Use this group box to set domain, primary, and secondary IP
addresses for DNS. Enable the function by clicking to check
Enable DNS. The default for the function is disabled
Enable WINS
Use this group box to set the primary and secondary IP
addresses of a WINS server. Enable the function by clicking to
check Enable WINS. The default for the function is disabled.
31