Setting Up A Socks Firewall; Firewall Settings Properties Sheet - HP Compaq t1000 Supplementary Manual

42
Advanced User Interface

Setting Up a SOCKS Firewall

Use the Firewall Settings properties sheet to set up a SOCKS (Socket Secure)
firewall. To invoke this properties sheet:
1. Click on the ICA Client Settings command button on the Apps properties
sheet.
2. Click the Firewall Settings tab.
The properties sheet displays. The following figure shows this sheet.
Figure 7-4 Firewall Settings Properties Sheet
The following table describes each of the functions of this sheet.
Table 7-4 Firewall Settings Properties Sheet
Function
Use Alternate Address Through
Firewalls
SOCKS
Description
By default the box is not checked.
Use this group box to enable and
configure SOCKS protocol.
Connect Via SOCKS Proxy
Check this box to enable a SOCKS
proxy connection. SOCKS is a
protocol that sets up a proxy server
between a client and a server. This
proxy server then acts as a channel for
communication between the client and
server. By default the box is not
checked.