At Commands Beginning With - HP Compaq t1000 Supplementary Manual

202
Getting Help
Table 39-2 AT Commands Beginning with "&"
Command
&B1
&C1
&D2
&F, &F0
&M0
&N, &N0
&Q5
&T4
&U1
&V
&W, &W0
&Y, &Y0
Table 39-3 AT Commands Beginning with "\"
Command
\A3
\G, \G0
\J, \J0
\L, \L0
\N7
Description
Disable port rate adjust
Carrier detect follows data carrier
Hang up and go to command mode during On-to-Off
DTR transition
Recall factory settings as active configuration
Asynchronous mode
Microcom QX/4232hs-compatible numeric result codes
displayed
Error Correction Mode V.42=> MNP=> Async
Grant request from remote for remote digital loopback
test
Data compression enabled
View active configuration, profiles (0,1), and numbers
Save active configuration as User Profile 0
Recall User Profile 0 on power-up
Description
Maximum MNP block size = 256 characters
Disable port flow control DCE to DCE
Disable port rate adjust
MNP stream link
Set Auto-reliable mode (LAPM with fallback to MNP,
then to normal)