82
Connection Configuration
Figure 14-2 TE Client Connection Wizard - Host Information
To use the Host Information dialog box:
1. Click on TCP/IP, Modem, or Serial:
2. If you clicked on TCP/IP:
a. Enter the host name in Host Name.
b. Use the Advanced command button if appropriate. (See "Using the TCP/IP
c. Click on Next. The Automate Login Process dialog box displays. See
3. If you clicked on Modem:
a. Select a configuration from Configuration Name.
b. Use the Configure command button if appropriate. (See "Using the Modem
c. Click on Next. The Automate Login Process dialog box displays. See
Telnet Configuration Dialog Box" for information about the Advanced
command button).
Figure 14-3 and proceed with these instructions.
Settings Dialog Box" for information about the Configure command button).
Figure 14-3 and proceed with these instructions.