Advanced Properties Sheet - HP Compaq t1000 Supplementary Manual

138
External Devices
The following table discusses this properties sheet.
Table 24-2 Advanced Properties Sheet
Function
MAC Address
AP Density
Transmit Rate
Description
Enter in this field a user assigned MAC
address. You will not have to change
this parameter for most networks. You
will only have to assign an address if
your network uses local MAC
addressing. By default this field is
blank.
Select in this scroll box an AP density
(access point density) value. This
parameter controls the roaming
sensitivity of the terminal. The values
are:
• Low Density
• Medium Density
• High Density
This parameter is set by:
• The density of access points in the
network.
• The configuration of the access
points.
The default is Low Density.
Select in this scroll box the
transmission rate of the connection.
The values are:
• Low
• Standard
• Medium
• High
The default is High.