Using The Global Ica Client Settings Dialog Box; Setting The Default Hotkeys; Default Hotkeys Properties Sheet - HP Compaq t1000 Supplementary Manual

38
Advanced User Interface

Using the Global ICA Client Settings Dialog Box

To invoke the Global ICA Settings dialog box:
1. Press F2 to invoke the Terminal Properties dialog box.
2. Click on the Apps tab in the Terminal Properties dialog box.
3. Click on the ICA Client Settings command button in the Global Settings group
box.
There are four properties sheets associated with the Global ICA Client Settings
dialog box. A description of the functions of each sheet follows.

Setting the Default Hotkeys

Hotkeys can be used during ICA sessions to invoke various functions. Some
hotkeys control the behavior of ICA Windows, while others emulate standard
Windows hotkeys. To set hotkeys, access the Default Hotkeys properties sheet. It
is the default properties sheet for the Global ICA Client Settings dialog box. The
following figure shows the Default Hotkeys properties sheet.
Use the pull-down scroll boxes on the Default Hotkey properties sheet to
customize default hotkey key sequences. The following table describes the
hotkeys.
Table 7-1 Default Hotkeys Properties Sheet
Function
Status Dialog
Close Session
Toggle Title Bar
Ctrl+Alt+Del
Description
This function displays ICA connection status.
This function disconnects an ICA client from a server
and closes the client window on the local desktop.
When you use this hotkey, the open session continues
to run on the server. If you do not want to leave the
session running in a disconnected state, log off.
This function alternately hides and displays the client
window title bar:
• Use the title bar to drag the client window to
different positions on a local desktop.
• Remove the title bar to maximize your workspace.
This hotkey displays the Windows NT Security dialog
box.