Upgrade Properties Sheet; Manual Dhcp Firmware Upgrades - HP Compaq t1000 Supplementary Manual

162
Firmware Upgrades
6. Click on the Change DHCP Option... command button.
7. Use the Change Option IDs dialog box to change options, then click on OK to
save.
8. Click on the Upgrade tab.
9. Click on the Use FTP Information From DHCP Server radio button on the

Upgrade properties sheet.

10.Shut down the terminal. See "Shutting Down the Terminal" in the users guide for
more information.
Your terminal will automatically upgrade itself when it is turned on again.

Manual DHCP Firmware Upgrades

1. Follow instruction 1 through 3 and 5 through 8 in "The Upgrade Process."
2. Click on the Upgrade... command button on the Upgrade properties sheet.
This will initiate the firmware upgrade. Once the upgrade is complete, the terminal
will reboot to the Setup Wizard.
Make sure your DHCP options match the options on
the DHCP server.
Note
Pay special attention to these FTP Option IDs
functions: File Server (the location of the server where
the firmware resides), and File Root Path (the location
of the firmware). If they are not correct, the upgrade will
fail.
Note
You will need the image, bootstrap.exe, and the
params.ini files on the FTP server to do the upgrade.