Connection Configuration
Figure 16-3 TE Client Connection Wizard - Host Information
To use the Host Information dialog box:
1. Click on TCP/IP, Modem, or Serial:
2. If you clicked on TCP/IP:
a. Enter the host name or IP address in Host Name.
b. Use the Advanced command button if appropriate. (See "Using the TCP/IP
Telnet Configuration Dialog Box" for information about the Advanced
command button).
c. Click on Next. The Automate Login Process dialog box displays. See
Figure 16-4 and proceed with these instructions.
3. If you clicked on Modem:
a. Select a configuration from Configuration Name.
b. Use the Configure command button if appropriate. (See "Using the Modem
Settings Dialog Box" for information about the Configure command button).
111