HP Compaq SP700 User Manual page 55

6. Remove the five screws that secure the power supply to the back of the chassis.
7. Slide the power supply toward the front of the chassis, then pull up to remove it.
Figure 3-46. Removing the power supply
To replace the power supply, reverse the above procedure.
WARNING: To reduce the risk of electric shock or damage to the equipment, do
not disable the power cord grounding plug. The ground plug is an important
safety feature.
WARNING: Do not reconnect power to the computer until the computer cover is
replaced. Connecting the power before replacing the computer cover can result in
personal injury or equipment damage.
Compaq Professional Workstation SP700 Maintenance and Service Guide
3-55