HP Compaq SP700 User Manual page 31

Hp compaq sp700: user guide
Hide thumbs Also See for Compaq SP700:
Table of Contents

Advertisement

8.
Connect the cables to the rear of the drive.
Figure 3-28.
Connecting the SCSI signal cable and power cable
9.
Remove the blank bezel from the front bezel, if necessary. (If you are installing a hard
drive, leave the blank bezel in place for proper cooling.)
10. Replace the front bezel and the side access panel.
NOTE: The system recognizes a Compaq hard drive and automatically reconfigures the
computer.
Compaq Professional Workstation SP700 Maintenance and Service Guide
3-31

Advertisement

Table of Contents
loading

Table of Contents