HP Compaq SP700 User Manual page 24

3-24 Removal and Replacement Procedures
6. Pull the CD-ROM drive straight out of the chassis.
Figure 3-20. Removing the CD-ROM drive
To replace the CD-ROM drive, reverse the above procedure.
NOTE: Be sure to transfer the guide screw from the old drive to the new one. The screw is
installed on the right front side of the drive. Note that extra guide screws are provided on the side
of the air plenum.
CAUTION: Use only 3/16-inch or 5-mm screws as guide screws. Longer screws
can damage the internal components of the drive.
CAUTION: When servicing the workstation, be sure cables are placed in their
proper locations during the reassembly process. Improper cable placement can
damage the workstation.