Panasonic KX-FM330GR Service Manual page 94

KX-FP320G / KX-FM330G
Summary:
Does not receive in the automatic mode.
Does not transmit.
Does not receive.
6. The unit can copy, but the transmission and reception image are incorrect.
(Long distance or international communication operation)
This widely depends on the transmission and reception capability of the other FAX unit and the line conditions.
The countermeasures for this unit are shown below.
Transmission Operation:
Set the transmitting speed to 4800BPS (service mode: code No. 717) or select the overseas mode.
Reception Operation:
If 80% or more of the reception is incorrect, set the receiving speed to 4800BPS. (Service mode: code No. 718)
· Refer to 2.4.4. SERVICE FUNCTION TABLE.
Long distance and international communication operations
SYMPTOM COUNTERMEASURE
1. If possible, manual transmission should be done from the
transmission side.
2. If possible, two pauses should be inserted at the end of the auto
dial number on the transmission side.
3. If possible, the Function Selector Switch should be switched to
FAX.
4. If possible, the Function Selector Switch should be switched to
FAX.
1. Confirm the international line mode is ON. (Service mode:
code No. 521)
2. Enable the international DIS detection setting. (Service mode:
code No. 594)
1. Set the time between the CED signal and the DIS signal to
500 msec. (Service mode: code No. 593)
2. Set the CED frequency to 1100Hz. (Service mode: code No. 520)
3. Reduce the RCV sesitivity. (Service mode: code No. 598)
52