Panasonic KX-FM330GR Service Manual page 66

KX-FP320G / KX-FM330G
1.15.3. MAINTENANCE
1.15.3.1. CLEANING THE DOCUMENT FEEDER UNIT
If misfeeding occurs frequently or when dirty patterns or black bands appear on a copied or transmitted document, clean the
document feed rollers, sub roller, separation rubber flap, white plate and target glass.
Front cover
Target glass
White plate
1.15.3.2. CLEANING THE THERMAL HEAD
If dirty patterns or black bands appear on a copied or received document, clean the thermal head.
Thermal head
Caution
Do not push on the black cover.
1.15.3.3. CLEANING THE PICKUP ROLLER........Refer to 4. DISASSEMBLY
INSTRUCTIONS
Caution:
To prevent malfunction due to static electricity, do not use a dry cloth and do not touch the thermal head directly with your finger.
Separation rubber
Sub roller
Document feeder rollers &
Separation roller
Front cover open lever
Front cover
(1) Disconnect the power cord and the telephone
line cord.
(2) Slide the lever forwards to open the front
cover.
(3) Clean the document feed rollers, sub roller
and separation rubber and separation roller
with a cloth moistened with isopropyl rubbing
alcohol, and let dry thooughly.
(4) Clean the white plate and the target glass with
a soft dry cloth.
(5) Close the front cover by gently pressing down
on both ends.
(6) Connect the power cord and telephone line
cord.
(1) Disconnect the power cord and the telephone
line cord.
(2) Slide the open lever forwards to open the front
cover.
(3) Clean the thermal head with a cloth moistened
with isopropyl rubbing alcohol, then dry
thoroughly.
(4) Close the front cover by gently pressing down
on both ends.
(5) Connect the power cord and telephone line
cord.
24