Panasonic KX-FM330GR Service Manual page 63

Guide tabs
Blue label
Blue gear
Cartridge
Top side
gears
Bottom
side gear
Bottom
side gears
•How much film you have left
To check the amount of remaining film, press FILM REMAINING while the unit is idle. The display indicates the approximate
amount of remaining film.
Display: FILM E
(Film –
FILM E
(Film –
Note:
Words in brackets ( ) are German. A translated version for each market is available with this model series.
Green gears
Slots
Film
Top side
gears
B
A
Blue labels
Film
cartridge
(FILMANZEIGE)
F
+)
When the film indicator points to this position, the remaining film will print up to 25
F
pages of letter size documents. Prepare a new film or film cartridge for replacement.
+)
(6) Insert the three green gears into the remaining cores
of the new film.
(7) Insert the film into the cartridge so that the blue gear
matches the blue label on the cartridge.
(8) Lock the four gears of the film by ( A ) pushing back
the top side gears and ( B ) pulling the bottom side
gears forwards until they click into place.
• If the film is slack, tighten it by winding the bottom
side gears.
Incorrect
(9) Insert the film cartridge by matching the blue label on
the cartridge with that on the unit.
(10) Close the front cover securely by pushing down on both
ends.
• The unit will check the film is set correctly and the follow-
ing message will be displayed.
Display:
• If the following message is displayed, the film is not
correctly inserted in the cartridge.
Reinsert it correctly.
21
KX-FP320G / KX-FM330G
Correct
PLEASE WAIT
(Bitte warte)
CHECK FILM
(Film prüfen)