Panasonic KX-FM330GR Service Manual page 150

KX-FP320G / KX-FM330G
2.4.7. SPECIAL SERVICE JOURNAL
The journal shown below is printed by pressing [MENU] and then #9000*880 [START]. It can be taken out by remote control
(together with the existing journal).[Refer to 2.3.3.3.2. Remote programing]
JOURNAL 2
The journal 2 displays the additional detailed information about the last 35 communications.Only the No. is the same information
as journal on user mode. (Refer to 2.3.3.3.2. Remote programing.)
Descriptions of individual items.
1. RCV. MODE
Indicates which receive mode the unit was in when the unit received a fax message. This information is also displayed when
the unit transmitted a fax messege.
2. SPEED
Indicates speed of the communication. If multiple pages are transmitted or received, it indicates the last page´s communication
speed. In the case of communication error, "?" is displayed in this field.
3. RESOLUTION
Indicates resolution at the communication. If multiple pages are transmitted or received, it indicates the last page´s resolution.
In the case of communication error, "?" is displayed in this field.
4. RX-TRIG. (CNT.)
Indicates the trigger that causes the unit to switch to the fax receive mode. The available options are listed in the table below.
The values in parentheses indicate how many times the trigger has been used. (For example, "00003" means three times.)
No. Display
1 FAX MODE
2 MAN RCV
3 FRN RCV
4 CNG OGM
5 CNG ICM
6 VOX
7 RMT DTMF
8 PAL DTMF
9 TURN-ON
10 TIME OUT
11 IDENT
Means the unit received a fax message in the FAX mode. In this case, the valnes in the
parentheses are not displayed.
Means the unit received a fax message by manual operetion.
Means the unit received a fax message by friendly signal detection.
Means the unit detected the CNG while it was sending the Dummy Ring Back Tone in the TEL/FA
mode or answering a call in the EXT-TAM mode. OR Means the unit detected the CNG while it
was sending OMG in the ANS/FAX mode.
Means the unit detected the CNG while it was recording ICM in the ANS/FAX mode.
Means the unit detected silence or no voice.
Means the unit detected DTMF (Remote Fax activation code) entered remotely.
Means the unit detected DTMF (Remote Fax activation code) entered by a para-Tel.
Means the unit started to receive after the expiry of 15-time rings. (Remote Turn On: Service Code
#573)
Means the unit started to receive after Ring Time Out in the EXT-TAM or TEL/FAX mode.
Means the unit detected Ring Detection.
Function
108