AGFA DX-D 100 User Manual page 67

6. Enter the new password.
7. Enter the new password again.
8. Click Save.
A confirmation dialog is displayed.
9. Click OK.
Removing an RFID key card from the configuration of the RFID
reader
If a card is lost, or the card needs to be configured for another user, it is best to
remove the card's configuration from the configuration list.
1. Read the card's serial number.
• Method 1.
Use a smartphone with NFC reader possiblilities and read the serial
card number.
• Method 2.
Use an existing application from Aloaha
C:\Program files (x86)\Aloaha\Keycard_ChangePIN.exe
Start the application, apply a card to the reader and press the Serials
button. The serial number will be shown.
2. Go to C:\Program Files(x86)\Aloaha\SerialStore
3. Find the file that matches the card's serial number and delete the file.
Copying the configuration of the RFID reader to another DX-D 100
system
The configuration of the RFID reader can be copied to other systems.
1. Go to C:\Program Files(x86)\Aloaha\SerialStore.
2. Copy all the txt files to the same directory on the other system.
Note: A configuration can only be copied if the windows
usernames and password are the same on both systems.
DX-D 100 | Getting started | 67
0187K EN 20191024 1609