Managing The Access Codes For The On/Off Keypad - AGFA DX-D 100 User Manual

Managing the access codes for the on/off keypad

One or more access codes can be configured for unlocking the on/off keypad.
Power button
1.
Status indicator lights
2.
Enter button
3.
Topics:
• Modifying the access code
• Adding an extra access code
• Deleting an access code
Modifying the access code
1. Shut down the system.
2. Press and hold the power button until the green status indicator light
starts blinking.
3. Press and hold the enter button until the blue status indicator light starts
blinking.
4. Dial the access code and press the enter button.
The blue status indicator light is lit.
5. Press and hold the number 2 button until the blue status indicator starts
blinking fast.
6. Dial the new four digit access code and press the enter button.
The green status indicator light is blinking.
The new access code replaces the original access code.
Adding an extra access code
1. Shut down the system.
2. Press and hold the power button until the green status indicator light
starts blinking.
3. Press and hold the enter button until the blue status indicator light starts
blinking.
4. Dial the access code and press the enter button.
The blue status indicator light is lit.
1
2
3
DX-D 100 | Getting started | 63
0187K EN 20191024 1609