AGFA DX-D 100 User Manual page 64

64 | DX-D 100 | Getting started
5. Press and hold the number 1 button until the blue status indicator starts
blinking fast.
6. Dial the new four digit access code and press the enter button.
The green status indicator light is blinking.
The device can now be unlocked using the new access code as well.
Deleting an access code
1. Shut down the system.
2. Press and hold the power button until the green status indicator light
starts blinking.
3. Press and hold the enter button until the blue status indicator light starts
blinking.
4. Dial the access code and press the enter button.
The blue status indicator light is lit.
5. Press and hold the number 3 button until the blue status indicator starts
blinking fast.
The blue status indicator light is blinking fast for a while, then the green
status indicator light is blinking.
The access code cannot but used anymore to unlock the device.
0187K EN 20191024 1609