AGFA DX-D 100 User Manual page 66

66 | DX-D 100 | Getting started
8. Enter PIN code 0102.
If an individual PIN code is entered, the user will be required to enter that
PIN code each time when logging in to the system.
9. Touch the RFID reader with the new RFID key.
10. Click Save.
A confirmation dialog is displayed.
11. Click OK.
Updating the password of a user
If the password of a user has been changed on Windows, the user password
must also be updated in the Keycard Credentials tool.
If multiple RFID keys are linked to this Windows user account, the procedure
must be repeated for each RFID key.
To do this, you need the user's keycard and the new password.
1. Go to the Windows Start menu > Aloaha > Keycard Credentials and
click Keycard Credentials.
The Keycard Credentials dialog is displayed.
Figure 19: Keycard Credentials
2. Touch the RFID reader with the user's RFID key.
3. Enter PIN code 0102.
4. Push the button Refresh list above.
In the Accounts for card field, the connected user will appear.
5. Click the user account.
The user name is copied to the Username field.
0187K EN 20191024 1609