Positioning the unit
Use the motion controls to adjust the position of the unit with respect to
the patient.
The four buttons on the tube-collimator handles control the motion of
each driving wheel (forwards/backwards).
1
Backwards to the right
1.
Forwards to the right
2.
Forwards to the left
3.
Backwards to the left
4.
Positioning the X-ray tube and collimator
Use the tube-collimator handles to rotate the X-ray tube on its transversal or
horizontal axis or to rotate the collimator on its vertical axis.
Basic imaging workflow
Topics:
•
Retrieving the patient info
•
Selecting the exposure
•
Preparing the exposure
•
Checking the exposure settings
•
Executing the exposure
•
Performing a quality control
WARNING:
Monitor with special care the patient position or anyone
present, to avoid injury caused by unit movements.
Intravenous tubing, catheters and other patient connected
lines should be routed away from moving equipment.
2
3
DX-D 100 | Getting started | 53
4
0187K EN 20191024 1609