AGFA DX-D 100 User Manual page 61

Restoring the connection between the barcode reader and the USB
access point
The bluetooth LED is flashing fast when it has lost connection to the USB
access point.
To restore the connection:
1. Scan the barcode on the USB access point.
The bluetooth LED flashes every 4 seconds when the connection is
restored.
2. If the connection is not restored, press and hold the bluetooth button for
five seconds and scan again the barcode on the USB access point.
3. If the connection is still not restored, repeat the last step.
DX-D 100 | Getting started | 61
0187K EN 20191024 1609