Connectivity - AGFA DX-D 100 User Manual

30 | DX-D 100 | Introduction

Connectivity

DX-D 100 requires a TCP/IP network to exchange information with a number
of other devices. The recommended minimum network performance is
100 Mbit for wired ethernet and IEEE 802.11 g for wireless network.
DX-D 100 communicates with other devices in the hospital network using one
of the following protocols:
• DICOM
• IHE
DX-D 100 can be connected to a RIS system (input scheduling), a PACS system
(output image/data management) and to a hardcopy device (output image).
Topics:
• Connecting DX-D 100 to a wired network
• Connecting USB devices
0187K EN 20191024 1609
Note: A wireless network operating on variable speed or subject to
interruptions will cause delays on the NX workstation.