Exiting Suspend
Exit suspend by pressing the suspend button once. When you exit
Suspend, the following occurs:
The computer beeps twice.
The power/suspend indicator turns on (continuous).
The "instant-on" feature lets you pick up your work right
where you left off. No information is lost.
IMPORTANT:
The computer will not exit Suspend if the battery is
low and external power is not connected. In this case, you must
find a new power source for the computer. When a new power
source is connected, press the suspend button once to return your
information to the screen.
If the computer is in Suspend, and a low-battery condition occurs,
the computer automatically initiates Hibernation (unless
Hibernation has been disabled), saves your information to the hard
disk, and turns off the computer. When you install a fully charged
battery or connect to an external power source, your information
returns to the screen at the point where Suspend was initiated. No
information is lost.
Managing Power 5-5