Compaq Armada 4200 Reference Manual page 110

4. As soon as the cursor (a white box) is displayed in the upper-
right corner of the screen, press F10.
IMPORTANT: The cursor is displayed on the screen for about
two seconds. If you do not press F10 during this time, you
must restart the computer and try again.
5. If prompted, select a language.
The Compaq Utilities menu is displayed.
6. Select Computer Checkup (TEST). A test option menu is
displayed.
7. Select the View Device List option. A list of the installed
Compaq devices is displayed.
8. Verify that Computer Checkup correctly detected the devices
installed.
Devices from other manufacturers may not be detected
NOTE:
or may be reported inaccurately.
If the list is correct, select OK. The test option menu is
displayed again. Go to step 9.
If the list is incorrect, ensure that any new devices are
installed properly. If you do not find an installation
problem, call your Compaq authorized service provider.
9. Select one of the following from the test option menu:
Quick Check Diagnostics
Runs a quick, general test on each device with a minimal
number of prompts. If errors occur, they are displayed when
the testing is complete.
Automatic Diagnostics
Runs unattended, maximum testing of each device with
minimal prompts. You can choose how many times to run
the tests, to stop on errors, or to print or file a log of errors.
Prompted Diagnostics
Allows maximum control over the device testing process.
You can choose attended or unattended testing, decide to
stop on errors, or choose to print or file a log of errors.
Diagnostics 14-5