Solving Software Application Problems; Solving Sound Problems - Compaq Armada 4200 Reference Manual

NOTE: If you are using an external monitor and simultaneously
displaying an image on the computer display and the external
monitor, the image on the external monitor may not fill the screen.

Solving Software Application Problems

Most software application or installation problems occur because
of one or more of the following conditions:
Application was not installed correctly.
Memory was not allocated correctly.
Conflict exists between applications.
Software Application Problems and Solutions
Problem
Cannot use an
application.
Insufficient
memory to run
application.

Solving Sound Problems

Some common causes and solutions for sound problems are listed
in the following table.
Problem
Computer beeps
after you turn it on.
Computer does not
beep after the Power-
On Self-Test (POST).
15-18 Troubleshooting
Probable Cause
The application
has not been
added to the
PATH statement.
System ran out of
memory for the
application.
Sound Problems and Solutions
Possible Cause
This is normal; it
indicates
successful
completion of the
POST.
Computer volume
is turned down.
Solution
Using Windows Notepad,
add the application directory
with the full path name to the
AUTOEXEC.BAT file.
Check the application
documentation for memory
requirements.
Install additional memory.
Solution
No action is required.
Use the Fn+F5 hotkeys and
the arrow keys to turn up
the volume.