Initiating Suspend; Exiting Suspend - Compaq Armada 4100 Reference Manual

. . . . . . . . . . . . . . . . . . . . . . . . .

Initiating Suspend

When Suspend is initiated, the following occurs:
The computer beeps twice.
NOTE: If speakers are turned off, beeps are not audible.
The screen blanks.
The power/suspend indicator light blinks.

Exiting Suspend

Exit suspend by pressing the suspend button once. When you exit
Suspend, the following occurs:
The computer beeps twice.
The power/suspend indicator turns on (continuous).
The "instant-on" feature lets you pick up your work right where you
left off. No information is lost.
IMPORTANT: The computer will not exit Suspend if the battery is low and
external power is not connected. In this case, you must find a new power
source for the computer. When a new power source is connected, press
the suspend button once to return your information to the screen.
If the computer is in Suspend, and a low-battery condition occurs, the
computer automatically initiates Hibernation (unless Hibernation has
been disabled), saves your information to the hard disk, and turns off the
computer. When you install a fully charged battery or connect to an
external power source, your information returns to the screen at the point
where Suspend was initiated. No information is lost.
5-4 Managing Power