Power Cord Set Requirements; General Requirements - Compaq Armada 4200 Reference Manual

appendix
P
OWER
R
EQUIREMENTS
The wide-range input feature of your AC Adapter permits it to operate
from any line voltage between 100 to 240 volts AC.
The power plug or power cord set (appliance coupler, flexible cord,
and wall plug) you received with your AC Adapter meets the
requirements for use in the country where you purchased your
computer.
Power cord sets for use in other countries must meet the requirements
of the country where you use the AC Adapter. For more information
on power cord set requirements, contact your Compaq authorized
dealer.

General Requirements

The requirements listed below are applicable to all countries:
1. The length of the power cord set must be at least 6.00 feet
(1.8 m) and a maximum of 9.75 feet (3.0 m).
2. All power cord sets must be approved by an acceptable accredited
agency responsible for evaluation in the country where the power
cord set will be used.
3. The power cord set must have a minimum current capacity of 2.5A
and a nominal voltage rating of 125 or 250 volts AC, as required
by each country's power system.
4. The appliance coupler must meet the mechanical configuration of
an EN 60 320/IEC 320 Standard Sheet C5 connector, for mating
with appliance inlet on the AC Adapter.
D
C S
ORD ET
Power Cord Set Requirements D-1