QuickBoot—Enables the computer to start up quickly,
minimizing POST. To disable QuickBoot and let the computer
complete all power-on tests, restart the computer. Then press
F10 as soon as the cursor appears in the upper-right corner of
the screen. Select Computer Setup, System Features, then
Boot Management. Click the Enable QuickBoot box to disable
or enable this feature.
Initiating Quick Controls
After setting the power-on password in Passwords Properties,
Quick Controls can be initiated in two ways:
With Fn+F6 hotkeys, which work only on the computer
keyboard.
With the key combination Ctrl+Alt+L, which works on both the
computer and external keyboards.
To exit QuickLock/QuickBlank once it has been activated,
NOTE:
enter your power-on password.
12-6 Setting Security Features